English   Francais   Deutsch   Espanol

   Alwayse Engineering Limited, Miller Street, Birmingham B6 4NF UK

                            Telephone: +44 121 380 4700    Fax : +44 121 380 4701
 
   
   
Euro Ball Transfer Units and Fixing Clips

Print Page
   
Euro Ball Transfer Units and Fixing Clips General Tolerance unless stated ±0.3mm

The individual product features are displayed at the foot of the table...
   
 

REF. NO.

Ball Size

(mm)

Support Load (Kgs)

TYPE 13
Carbon Steel Bearings, Zinc Plated Pressings

TYPE 15
Stainless Steel Bearings and Pressings
Weight in Kgs Load in Kgs Weight in Kgs Load in Kgs
           
515-0 15 0.043 60 0.043 38
515-1 0.043 60 0.043 38
515-2 0.043 60 0.043 38
515-4 0.043 60 0.043 38
515-6 0.054 60 0.054 38
522-0 22 0.132 160 0.132 100
522-1 0.132 160 0.132 100
522-2 0.132 160 0.132 100
522-4 0.132 160 0.132 100
522-6 0.165 160 0.165 100
530-0 30 0.278 300 0.278 200
530-1 0.278 300 0.278 200
530-2 0.278 300 0.278 200
530-4 0.278 300 0.278 200
530-6 0.335 300 0.335 200
545-0 45 0.725 610 0.725 250
545-1 0.725 610 0.725 250
545-2 0.725 610 0.725 250
545-4 0.725 610 0.725 250
545-6 0.887 610 0.887 250

  CL14 Fixing Clips
  REF. NO. For Units   Fixing Hole Sizes (mm)
     
CL14-515 515-0, 515-4. 515-6 24 + 1.0 + 1.5
CL14-522 522-0, 522-4, 522-6 36 + 1.0 + 1.5
CL14-530 530-0, 530-4, 530-6 45 + 1.0 + 1.5
CL14-545 545-0, 545-4, 545-6 62 + 1.0 + 1.5

   IMPORTANT - If you are unsure of your requirements, consult us: TECHNICAL DEPARTMENT

To order, specify Ref No. and TYPE, i.e. 515-0-13

General Features

ALWAYSE EURO Units have a main bearing cup of special toughened steel with a dirt exit hole and a felt or plastic seal. Felt seals are standard. Min. -30c to max +70c continuous, or +100c intermittent. Special seals may need to be fitted to suit extreme conditions. In clean conditions and without seals +150c to +200c are possible using Type 15 units at reduced loads.

MATERIAL SPEC:

Stainless Steel Pressings AISI 304
Stainless Steel Balls AISI 420
Nylon Balls NYLON 66
 

         
Euro 0   Euro 1  
         
Euro 0 Ball Transfer Unit Features: Various fixing clips available, dimensionally compatible with the 800 series.


 		   Euro 1 Ball Transfer Unit Features: Pop rivets or screw fixing.


 
         
Euro 2   Euro 4  
         

      

Features: Easy fitting with a 3 prong built-
in clip from top face of ball table, compact
and low profile, dimensionally identical to other Euro Unit ball units

 		   Euro 4 Ball Transfer Unit Features: Various fixing clips available. Coned outer ring. Dimensionally compatible with the 800 series.


 
         
Euro 6     CL14 Fixing Clips  
         
Euro 6 Ball Transfer Unit Features: Various fixing clips available. Reinforced coned outer ring and support cup for improved protection against shock loading. Dimensionally compatible with the 800 series.


 		   CL14 Fixing Clips Features: Press in to fix ball unit, prise out ball unit to remove.

 
         



 
 

 
 

Alwayse Engineering Limited ® | Registered office address as above | Reg. No. 362715 England