English   Francais   Deutsch   Espanol

   Alwayse Engineering Limited, Miller Street, Birmingham B6 4NF UK

                            Telephone: +44 121 380 4700    Fax : +44 121 380 4701
 
   
   
Glide-Alwayse Ball Transfer Units and Fixing Sockets

Print Page
   
Glide-Alwayse Ball Transfer Units and Fixing Sockets General Tolerance unless stated ±0.3mm

The individual product features are displayed at the foot of the table...
   
 

REF. NO.

Fixing

Ball Size

(mm)

Weight in (Kgs)

Support Load (Kgs)

TYPE 13
Carbon Steel Bearings, Zinc Plated Pressings

TYPE 14
Nylon Load Bearings, Zinc Plated Pressings

TYPE 15
Stainless Steel Bearings and Pressings

TYPE 16
Stainless Steel Bearings, Zinc Plated Pressings
       
               
1700 Plug 25.4 0.100 50 20 50 50
1701 Bolt 0.120
1702 Flange
1703 Plate
1709 Grip Neck
1050 25.4
 1503 25.4

  Fixing Sockets for Glide Alwayse 1704 & 1709
  REF. NO. For Unit Type Description
       
1705 1709 Grip Neck

Toothed Steel Socket and 19mm Toothed Plate

Application: Wood
1707 1709 Plastic Spined

Round Plastic Splined Socket

Application: Round Section Tube
1708 1709 Plastic Spined

Square Plastic Spined Socket

Application: Square Section Tube

IMPORTANT - If you are unsure of your requirements, consult us: TECHNICAL DEPARTMENT

To order, specify Ref No. and Type, i.e. 1700-13

General Features

This is a simple and inexpensive range of ball transfer units which have a large ball exposure. They are ideal for lighter duties and where there is a cost consideration. All units are fitted with a seal which simply and effectively removes debris by an internal plastic scraper. For normal applications steel bearings with zinc plated pressings and components are recommended. However, when used as a castor or in wet conditions, stainless steel is recommended.

         
1700     1701 Bolt Fixing  
         
1700 Ball Transfer Unit Features: Plain body, dirt exit hole standard.
 		   1701 Bolt Fixing Ball Transfer Unit Features: Drill hole nut and bolt fixing. Maximum tightening torque is 15Nm.

 
         
1702 Flange Fixing   1703 Plate Fixing  
         
1702 Flange Fixing Ball Transfer Unit Features: Low profile flange fixing, dirt exit hole standard

 		   1703 Plate Fixing Ball Transfer Unit Features: High profile base plate fixing. Drill hole fixing. Dirt exit hole standard.

 
         
1709 Grip Neck Fixing
  1705 Grip Neck  
         
1709 Grip Neck Fixing Ball Transfer Unit Features: Plastic or steel socket fixing.
 		   1705 Grip Neck Fixing Socket Toothed Steel Socket 19 mm Head dia For 9.5mm dia x 35mm deep drilled hole.

Application: Wood

 
         
1707 Round Plastic Splined Socket   1708 Square Plastic Splined Socket
         
1707 Round Plastic Splined Fixing Socket Two sizes available. Tube 15.8 mm O/D x 1.2mm wall thickness 19.0mm O/D x 1.2 up to 1.6 mm wall thickness.

Application: Round Section Tube

 

   1708 Square Plastic Splined Fixing Socket Two sizes available 19mm A/F square x 1.2mm up to 1.6mm wall thickness 25.4mm A/F square x 1.2mm up to 1.6mm wall thickness.

Application: Square Section Tube
 



 
 

 
 

Alwayse Engineering Limited ® | Registered office address as above | Reg. No. 362715 England