Hevi-Load Ball Transfer Units 5,6 and Die Lifters

Alwayse Engineering Limited, Miller Street, Birmingham B6 4NF UK

Telephone: +44 121 380 4700 Fax : +44 121 380 4701

	General Tolerance unless stated ±0.3mm The individual product features are displayed at the foot of the table...

Pattern

Ref. No.

Ball Size

(mm)

Weight in (Kgs)

Support Load (Kgs)

Maximum Deflection

TYPE 13
Carbon Steel Balls, Zinc Plated Pressings

TYPE 16
Stainless Steel Balls, Zinc Plated Pressings


Hevi-Load 5	7107	12.7	0.067	7	7	2
	7108		0.067	15	15	2
	7109		0.069	25	25	3.2
	7138	25.4	0.517	7	7
	7132			25	25
	7133			45	45
	7134		0.522	70	70
	7135		0.795	90	90
	7136		0.795	140	140
	7139		0.804	180	180
	7137		0.813	230	230
	7155	38.1	1.860	225	225	5.6
	7158		1.940	310	185
	7159		2.040	460	230
	7156		1.980	565	375
	7160		2.220	690	460
	7157		2.620	760	565
	7178	50.8	9.000	795	335	6.3
	7175			1000	685
	7176			1235	830
	7177			1560	930

Hevi-Load 6	7105	12.7	0.078	25	25	2
Hevi-Load 6	7105	12.7	0.074	40	40	1.5
Die-Lifters	DL-24	12.7	0.074	40	40	1.5
	DL-30	15.8	0.127	60	60	1.5
	DL-40	25.4	0.320	100	100	1.5
	DL-50	30.0	0.660	335	200	1.5
	DL-70	38.1	2.000	500	325	2

IMPORTANT - If you are unsure of your requirements, consult us: TECHNICAL DEPARTMENT

To order, specify Ref No and TYPE i.e. 7105-13

Hevi-Load 5

Hevi-Load 6

Features: High load capacity, greater shock loading protection. Screw fixing collar for 038.1mm and 050.8mm ball units only, for secure fixing in ball down applications. *Ball units 7107, 7108 and 7109 incorporate the shell ball design.

Features: Compact, interference fitting. Greater shock loading protection.

Die Lifters

Features:

Tolerance ring for interference fitting for ball up and ball down fitting. Greater shock loading protection.

Shown here at zero deflection (centre image) and at maximum deflection (right hand image).

Alwayse Engineering Limited ® | Registered office address as above | Reg. No. 362715 England