Flange Fixing Ball Transfer Units

Alwayse Engineering Limited
Miller Street
Birmingham B6 4NF
United Kingdom

Telephone: +44 121 380 4700
Fax : +44 121 380 4701

General Tolerance unless stated ±0.3mm

The individual product features are displayed at the foot of the table...

REF No.	Fixing Holes	Ball Size (mm)	Weight in (Kg's)	Support Load (Kg's)
				TYPE 13 Carbon Steele Bearings, Zinc Plated Pressings		TYPE 15 Stainless Steele Bearings and Pressings
				LOAD UP	LOAD DOWN	LOAD UP	LOAD DOWN
3016	2	15.8	0.045	12	6	12	6
3000	2	19	0.087	25	10	25	10
3006	3
3025	2	25	0.135	55	25	55	25
1000	2	25	0.175
1008	3
1022	3	32	0.265	125	55	125	55
1035	2
2000	2	40	0.515	140	60	140	60
2011	3
4001	3	50	1.065	340	100	250	100
1502	2	25	0.196	100	50	100	50
1010	-	25	0.195	55	25	55	25
1030	-	32	0.275	125	55	125	55
2002	3	40	0.635	225	100	225	100

IMPORTANT - If you are unsure of your requirements, consult us: FREE TECHNICAL ADVICE

To order, specify REF No and TYPE, i.e. 3016-13

3016 - 4001		1010 / 1030
	Features: General purpose. Low profile, dirt hole. No seals in 3016 and 3025 units. Also available with a solid steel inner ring (SI) option without seal.		Features: Low profile, high load capacity. Knife edge seal on load ball. Dirt exit hole. Requires 5mm radius on fixing hole.
1502		2002 XTRA - TUF
	Features: Press ball unit into hole to fix, prise out to remove. Units can either be fixed or replaced quickly. Low profile, dirt exit hole.		Features: Heavy duty construction, designed for arduous and dirty conditions. Flushing hole for cleaning, extra large dirt exit hole. 3 Holes for heavy duty cleaning.

Alwayse Engineering Limited ® | Registered office address as above | Reg. No. 362715 England