|
Print
Page |
 |
 TUFF Series Heavy Duty Ball Transfer Units
General Tolerance unless stated ±0.3mm
The individual product features are displayed at the foot of the table... |
| REF No. |
Ball Size (mm) |
Weight in (Kg's) |
Support Load (Kg's) |
TYPE 13
Carbon Steele Bearings, Zinc Plated Pressings |
TYPE 15
Stainless Steele Bearings and Pressings |
TYPE 16
Stainless Steele Bearings, Zinc Plated Pressings |
| 0519-21 |
12.7 |
0.036 |
25 |
25 |
25 |
| 0519-22 |
0.051 |
| 0519-23 |
0.042 |
| 0519-24 |
0.096 |
| 3019-21 |
19 |
0.120 |
50 |
50 |
50 |
| 3019-22 |
0.168 |
| 3019-23 |
0.124 |
| 3019-24 |
0.220 |
| 1019-21 |
25.4 |
0.177 |
125 |
125 |
125 |
| 1019-22 |
0.282 |
| 1019-23 |
0.190 |
| 1019-24 |
0.294 |
| 1029-21 |
32 |
0.486 |
250 |
250 |
250 |
| 1029-22 |
0.584 |
| 1029-23 |
0.500 |
| 1029-24 |
0.740 |
| 2019-21 |
40 |
0.850 |
500 |
250 |
500 |
| 2019-22 |
0.960 |
| 2019-23 |
0.900 |
| 2019-24 |
1.350 |
|
IMPORTANT - If you are unsure of your
requirements, consult us: FREE
TECHNICAL ADVICE
To order, specify REF No and TYPE, i.e. 0519-21-13 |
| General Features |
Features: Tough Series Heavy Duty
units are built to provide long working life and to withstand harsh
conditions. They have a solid machined body and incorporate both dust
seal and dirt exit hole (except No. 0519). They provide a higher load
capacity than standard units. Solid steel housing for attachment purposes,
but not stock loading. All units are machined using CNC machines from
one piece of steel, therefore flanges and threads are integral.
Also available
All patterns (i.e., 21, 22, 23 and 24) of Ref Numbers 0519, 3019 and
1019 are available with a nylon main ball (Type 14) ideal for light
loads and reduced marking applications.
|
| TUFF Heavy Duty 21 |
|
TUFF Heavy Duty 22 |
 |
Features: Plain solid machined body. |
 |
Features: Flange fixing either by using rivets
or screws. |
| TUFF Heavy Duty 23 |
|
TUFF Heavy Duty 24 |
 |
Features: Bolt, drilled hole fixing. Maximum tightening
torques range from 10Nm for M6 to 20Nm for M12. |
 |
Features: Bottom flange fixing either by using
rivets or screws. Drilled hole fixing. |
|
|
