Spring Loaded Ball Transfer Units

Alwayse Engineering Limited
Miller Street
Birmingham B6 4NF
United Kingdom

Telephone: +44 121 380 4700
Fax : +44 121 380 4701

General Tolerance unless stated ±0.3mm
General Spring Rating Tolerance ±10%

The individual product features are displayed at the foot of the table...

Unit Type	REF No.	Ball Size (mm)	Weight in (Kg's)	Support Load (Kg's)		Maximum Load Kg
Unit Type	REF No.	Ball Size (mm)	Weight in (Kg's)	TYPE 13 Carbon Steele Balls, Zinc Plated Pressings	TYPE 16 Stainless Steele Balls, Zinc Plated Pressings	Maximum Load Kg
Large Top Flange	3011	19	0.42	10	10	30
	1018	25.4	0.57	35	35	100
	1507	25.4	0.40	50	50	130
	1028	32	1.16	100	100	180
	2010	40	2.04	100	100	170
	4008	50	5.10	170	170	410
Large Bottom Flange	3012	19	0.42	10	10	35
	1510	25.4	0.45	50	50	130
	1032	32	0.39	100	100	200
Plain Body	3009	19	0.26	10	10	35
	1016	25.4	0.38	35	35	140
	1508	25.4	0.38	50	50	130
	1026	32	0.86	100	100	200
	2008	40	1.46	100	100	190
	4006	50	4.20	170	170	410
Small Top Flange	3010	19	0.30	10	10	30
	1017	25.4	0.44	35	35	100
	1509	25.4	0.39	50	50	130
	1027	32	0.99	100	100	180
	2009	40	1.80	100	100	170
	4007	50	4.40	170	170	410

IMPORTANT - If you are unsure of your requirements, consult us: FREE TECHNICAL ADVICE

To order, specify REF No and TYPE i.e. 3011-13

General Features
Features: Alwayse Spring Loaded Units are used in applications such as Guillotines, Presses, Moulding Machines, Tool Bases, Press Brakes and Shock Loading applications. They reduce damage caused by shock loads. They also allow for dimension changes due to temperature and self-adjust to evenly distribute loads. 1507, 1508 and 1509 Units These units incorporate a plastic scraper seal which keeps debris outside the ball unit. Spring loaded ball units can be used as die-lifters, inverted or at an angle. Completely stainless steel (Type 15) spring loaded ball units also available upon request. with reduced support loads and depres loads. The Type 14 ball units are suitable for light load applications and when object surface protection is required.
Large Top Flange		Large Bottom Flange
	Features: Large top flange fixing. Low profile. 1018 shown here.		Features: Large bottom flange fixing. High profile. 1032 shown here.
Plain Body		Small Top Flange
	Features: Plain body. Low profile. 1508 shown here.		Features: Small flange. Low profile. 1509 shown here.

Alwayse Engineering Limited ® | Registered office address as above | Reg. No. 362715 England