Base Fixing Ball Transfer Units

Alwayse Engineering Limited
Miller Street
Birmingham B6 4NF
United Kingdom

Telephone: +44 121 380 4700
Fax : +44 121 380 4701

General Tolerance unless stated ±0.3mm

The individual product features are displayed at the foot of the table...

REF No.	Ball Size (mm)	Fixing Holes	Weight in (Kg's)	Support Load (Kg's)
				TYPE 13 Carbon Steele Bearings, Zinc Plated Pressings		TYPE 15 Stainless Steele Bearings and Pressings
				LOAD UP	LOAD DOWN	LOAD UP	LOAD DOWN
3005	19	4	0.100	25	10	25	10
1005	25.4	4	0.160	55	25	55	25
1020	32	4	0.380	125	55	125	55
2003	40	4	0.480	140	60	140	60
4002	50	4	2.100	340	100	250	100
1006	25.4	2	0.160	55	25	55	25
1050	25.4	2	0.145	30	10	30	10
1503	25.4	2	0.200	100	50	100	50

IMPORTANT - If you are unsure of your requirements, consult us: FREE TECHNICAL ADVICE

To order, specify REF No and TYPE, i.e. 3005-13

3005		1005
	Features: Heavy duty fixing. High profile. Drill hole fixing. Optional extras: Dirt exit hole.		Features: Heavy duty fixing. High profile. Drill hole fixing. Optional extras: Dirt exit hole.
1020		2003
	Features: Heavy duty fixing. High load capacity. High profile. Drill hole fixing. Optional extras: Dirt exit hole.		Features: Heavy duty fixing. High load capacity. High profile. Drill hole fixing. Optional extras: Dirt exit hole.
4002		1006
	Features: Heavy duty fixing. High load capacity. High profile. Dirt exit hole standard. Drill hole fixing. Can be dismantled for cleaning. Optional extras: Grease points can be fitted.		Features: High load capacity. High profile. Dirt exit hole standard. Drill hole fixing. Ball unit 1050 is similar in design to the 1006 unit.
1503
	Features: High load capacity. High profile. Dirt exit hole standard. Drill hole fixing. knife edge seal on main ball.

Alwayse Engineering Limited ® | Registered office address as above | Reg. No. 362715 England