| General Features |
This is a simple and inexpensive range
of ball transfer units which have a large ball exposure. They are ideal
for lighter duties and where there is a cost consideration. All units
are fitted with a seal which simply and effectively removes debris by
an internal plastic scaper. For normal applicatins steel bearings with
zinc plated pressings and components are recommended. However, when
used as a castor or in wet conditions, stainless steel is recommended. |
| 1700 |
|
1701 Bolt Fixing |
 |
Features: Plain body, dirt exit hole standard. |
 |
Features: Drill hole nut and bolt fixing. Maximum
tightening torque is 15Nm. |
| 1702 Flange Fixing |
|
1703 Plate Fixing |
 |
Features: Low profile flange fixing, dirt exit
hole standard |
|
Features: High profile base plate fixing. Drill
hole fixing. Dirt exit hole standard. |
| 1709 Grip Neck Fixing |
|
|
 |
Features: Plastic or steel socket fixing. |
| 1705 Grip Neck |
|
1707 Round Plastic Splined Socket |
 |
Toothed Steel Socket 19 mm Head dia For 9.5mm
dia x 35mm deep drilled hole.
Application: Wood |
 |
Two sizes available. Tube 15.8 mm O/D x 1.2mm
wall thickness 19.0mm O/D x 1.2 up to 1.6 mm wall thickness.
Application: Round Section Tube |
| 1708 Square Plastic Splined Socket |
|
|
 |
Two sizes available 19mm A/F square x 1.2mm up to 1.6mm
wall thickness 25.4mm A/F square x 1.2mm up to 1.6mm wall thickness.
Application: Square Section Tube |
Glide-Alwayse
Ball Transfer Units & Fixing Sockets