 |
General Tolerance unless stated
±0.3mm
The individual
product features are
displayed at the foot of the
table... |
| |
|
| |
Unit Type |
Ref. No. |
Ball Size
(mm)
|
Weight in (Kgs) |
|
Support Load (Kgs) |
TYPE 13
Carbon Steel Balls, Zinc Plated
Pressings |
TYPE 16
Stainless Steel Balls, Zinc
Plated Pressings |
Maximum Load Kg |
|
| |
|
|
|
|
|
|
|
Large Top Flange |
3011 |
19 |
0.42 |
10 |
10 |
30 |
|
1018 |
25.4 |
0.57 |
35 |
35 |
100 |
|
1507 |
25.4 |
0.40 |
50 |
50 |
130 |
|
1028 |
32 |
1.16 |
100 |
100 |
180 |
|
2010 |
40 |
2.04 |
170 |
|
4008 |
50 |
5.10 |
170 |
170 |
410 |
|
Large Bottom Flange |
3012 |
19 |
0.42 |
10 |
10 |
35 |
|
1510 |
25.4 |
0.45 |
50 |
50 |
130 |
|
1032 |
32 |
1.02 |
100 |
100 |
200 |
|
Plain Body |
3009 |
19 |
0.26 |
10 |
10 |
35 |
|
1016 |
25.4 |
0.38 |
35 |
35 |
140 |
|
1508 |
25.4 |
0.38 |
50 |
50 |
130 |
|
1026 |
32 |
0.86 |
100 |
100 |
200 |
|
2008 |
40 |
1.46 |
190 |
|
4006 |
50 |
4.20 |
170 |
170 |
410 |
|
Small Top Flange |
3010 |
19 |
0.30 |
10 |
10 |
30 |
|
1017 |
25.4 |
0.44 |
35 |
35 |
100 |
|
1509 |
25.4 |
0.39 |
50 |
50 |
130 |
|
1027 |
32 |
0.99 |
100 |
100 |
180 |
|
2009 |
40 |
1.80 |
170 |
|
407 |
50 |
4.40 |
170 |
170 |
410 |
IMPORTANT - If you are unsure of your
requirements, consult us:
TECHNICAL
DEPARTMENT
To order, specify Ref
No and TYPE i.e.
3011-13
General Features
Features: Alwayse Spring Loaded Units
are used in applications such as
Guillotines, Presses, Moulding Machines,
Tool Bases, Press Brakes and Shock Loading
applications.
They reduce damage caused by shock loads.
They also allow for dimension changes due to
temperature and self-adjust to evenly
distribute loads.
1507, 1508 and 1509 Units
These units incorporate a plastic scraper
seal which keeps debris outside the ball
unit. Spring loaded ball units can be used
as die-lifters, inverted or at an angle.
Completely stainless steel (Type 15) spring
loaded ball units also available upon
request. with reduced support loads and
depress loads.
The Type 14 ball units are suitable for
light load applications and when object
surface protection is required.
| |
|
|
|
|
|
Large Top Flange |
|
Large Bottom Flange |
| |
|
|
|
|
|
|
Features: Large top
flange fixing. Low profile.
1018 shown here.
|
|
 |
Features: Large bottom
flange fixing. High profile.
1032 shown here.
|
| |
|
|
|
|
|
Plain Body |
|
Small Top Flange |
| |
|
|
|
|
 |
Features: Plain body. Low
profile.
1508 shown here.
|
|
 |
Features: Small flange.
Low profile.
1509 shown here.
|
|
