Base Fixing Units

ADVANCED

Dimension D - Body Diameter (mm)

1. n/a (9)

Dimension E - Under Flange to Base (mm)

1. n/a (9)

Dimension G - PCD or Centres of Fixing Holes (mm)

1. 40.0 +/- 0.2 (1)
2. 47.6 +/- 0.2 (2)
3. 49.2 +/- 0.2 (1)
4. 49.2 +/_ 0.2 (1)
5. 60.3 / 55.9 (3)
6. 89 +/- 0.2 (1)

Dimension H - Hole Diameter of Fixing Holes (mm)

1. 13.5 (1)
2. 4.8 (2)
3. 5.2 (1)
4. 6.3 (2)
5. 7.7 / 5.5 (3)

Dimension I / O - Seating Hole Diameter (mm)

1. 25.4 +/- 0.2 (2)
2. 47.6 +/- 0.2 (2)
3. 89 +/- 0.2 (1)
4. n/a (4)

Dimension J - Major Flange Size (mm)

1. 127 (1)
2. 50 (1)
3. 58.7 (2)
4. 65 (2)
5. 69 (3)

Dimension K - Minor Flange Size (mm)

1. 127 (1)
2. 35 (1)
3. 38 (2)
4. 51 (3)
5. 58.7 (2)

Dimension L - Overall Height (mm)

1. n/a (9)

Dimension N - Length of Thread (mm)

1. n/a (9)

Dimension O - M10 Nut Clearance Diameter (for 6025-5 only)

1. n/a (9)

Dimension P - Thread Size

1. n/a (9)

Dimension R - Radius Under Flange (mm)

1. n/a (9)

Dimension S - Base to top of Body (mm)

1. 54 (1)
2. n/a (8)

Dimension T - Table Top Thickness (mm)

1. n/a (9)

Dimension W - Spring Washer Diameter

1. n/a (9)

Dimension X - Across Flats

1. n/a (9)

Dimension Y - Minimum Hole Depth (mm)

1. n/a (9)

Dimension Z - Nut Clearance Diameter (mm)

1. n/a (9)

Fixing Holes

1. 2 (4)
2. 4 (5)

Fixing Methods

1. Base (9)

Load for Maximum Deflection (Kg)

1. n/a (9)

Load to Fully Depress (kg)

1. n/a (9)

Max Dynamic Loading (Kg) LOAD BALL DOWN

1. 10 (7)
2. 100 (1)
3. 25 (2)
4. 5 (1)
5. 50 (1)
6. 55 (1)
7. 60 (1)

Maximum Deflection (mm)

1. n/a (9)

Maximum Dynamic Support Load (Kg)

1. n/a (9)

Weight (Kg)

1. 0.042 (1)
2. 0.100 (1)
3. 0.145 (1)
4. 0.160 (2)
5. 0.200 (1)
6. 0.380 (1)
7. 0.480 (1)
8. 2.100 (1)