Made in the UK | Est. 1939

Hi-Tech, Double Seal, Units

The first Ball Transfer Unit to feature double sealing to exclude debris from the bearings. Body manufactured from Glass Reinforced Nylon with a hardened main bearing track. High resistance to organic solvents, petrol and oil. These units operate in any orientation with no loss of performance. A dirt exit hole can also be incorporated.

RUST RESISTANT UNITS (Type 15 only)
All parts are of non-rusting material, impervious to the most severe industrial environment and have high impact resistance. The main bearing track is hardened and has been load and life tested. The ball unit runs equally well inverted or at an angle.

MATERIALS
Steel (Type 13) or stainless (Type 15) load components and bearings. Hi-Tech Units have the same rated load capacities as the Ø25.4mm Hevi-Load units (see pages 22 & 23). The Hi-tech units have glass re-inforced nylon bodies so their weight is less than half that of the Ø25.4mm Hevi-Load units. Stainless steel bearings with steel load components (Type 16) are available on request.

CHEMICAL RESISTANCE
High resistance to organic solvents, petrol and oil. Seek our advice if in doubt.

TEMPERATURE
-30ºC upto +100ºC.

Need more help selecting the right Ball Unit?

You can use the Ball Unit Identifier to help you narrow your results or if you are unsure of your requirements, our technical team are here to help you...

If you are unsure of your requirements, our technical team are here to help you... Get in Touch

6 Item(s)

per page

6 Item(s)

per page

Quality Testing

Quality Testing

ALWAYSE Engineering is quality registered to ISO 9001 and has a rigorous policy of testing, utilising our specially designed test equipment.

Case Studies

Case Studies

Ball Units from ALWAYSE are used in many different industries. Take a look at some recent applications.

Catalogue

Catalogue

Our current Catalogue 14 is available as a PDF.

What is the Ball Unit Identifier?

The Alwayse Ball Unit Identifier allows you quickly identify suitable units based on 2 key criteria. By choosing from the options listed you will be given a variety of ball transfer products which meet your needs.

If you know the Alwayse part number enter it and you will be taken directly to the appropriate information. You can also enter other companies’ part numbers to find the Alwayse equivalent.

Fixing Method

Choose the appropriate fixing for your application if known.

Load Capacity

Choose the maximum load capacity required. Please note that these are for a load up orientation. For load down or other orientations please note that the maximum load capacity may be reduced.

More Information

Ball Unit Identifier

(What's This?)